Thorn Nomad Mk 2 2017

[pandanroll]

Not sure if you want to include full serial numbers, someone could take these and register them on Bikeregister or something..

GLWS

[Webswonder]

Thanks, i'll follow your advice and remove them.

Jeremy

[mickeg]

I think it looks better if the shifter cables go underneath the bottom bracket shell, see photo of mine.  The purpose of the rubber band wrapped around the two bolts is so that if one bolt got loose, it won't unthread and fall out.

[Webswonder]

I think it looks better if the shifter cables go underneath the bottom bracket shell, see photo of mine.  The purpose of the rubber band wrapped around the two bolts is so that if one bolt got loose, it won't unthread and fall out.

Hi, Thanks for that tip! Mine normally do (without the laggy band - now added) but I was trying not to block the view of the serial number and the S&S for the photo.

[in4]

That’s a great Nomad and I bet it could tell some great tales of the South Island ( One of my favourite places to be) With spring around the corner I’m sure you’ll get plenty of interest and a buyer. Coincidentally my first Nomad ( MK1 derailleur) was ridden to NZ and never came back.