Author Topic: New Style Eccentric Bottom Bracket Torque Setting  (Read 7311 times)

chipbury

  • Newbie
  • *
  • Posts: 13
New Style Eccentric Bottom Bracket Torque Setting
« on: June 21, 2023, 09:53:57 AM »
Good Morning All,

I have a Nomad Mk3 with the new style eccentric BB fixings (two capscrews clamping the frame onto the BB).

I can't find a torque setting for these two bolts?

Any thoughts?

Cheers,

Chris

PH

  • Hero Member
  • *****
  • Posts: 2397
Re: New Style Eccentric Bottom Bracket Torque Setting
« Reply #1 on: June 21, 2023, 10:39:28 AM »
Congrats on the new bike, lets hear more!
I don't know if there's an official figure, they don't have to be very tight, they're just pinching it shut.  For the original four bolt mini EBB, as found on the earlier Mercury, the recommendation was 5Nm, I'd suggest that was plenty.  I've never put a torque wrench on mine, or had it come loose, for me, hand strength without leaning on it is the right tightness for many steel components.
Is it in the current handbook? I don't have a copy, though it's probably downloadable. If not and you're concerned, ask Thorn.

WorldTourer

  • Full Member
  • ***
  • Posts: 148
Re: New Style Eccentric Bottom Bracket Torque Setting
« Reply #2 on: June 21, 2023, 12:18:15 PM »
I can't find a torque setting for these two bolts?

5 Nm sounds fine. I can tighten the bolts enough to hold perfectly, for many thousands of km, with my belt drive using just my little multitool.

chipbury

  • Newbie
  • *
  • Posts: 13
Re: New Style Eccentric Bottom Bracket Torque Setting
« Reply #3 on: June 21, 2023, 05:11:55 PM »
Thanks for the above,

I nipped them by hand so are probably about right.  I had to change the bottom bracket due to the bearings failing (@2000 miles), Thorn sent a free replacement as they hadn't fitted their preferred standard during the build as they weren't available due to Covid 19 supply issues.  Good service on there part I think.

See attached for a fairly recent picture of my bike.  No long distance touring but about 100 miles a week on short jaunts out (max 80miles).

I was sick of replacing transmission parts on derailleur fitted bikes - mostly due to the towpath near me turning all chain oil into grinding paste!

Cheers,

Chris

Danneaux

  • Administrator
  • Hero Member
  • *****
  • Posts: 8284
  • reisen statt rasen
Re: New Style Eccentric Bottom Bracket Torque Setting
« Reply #4 on: June 21, 2023, 06:05:35 PM »
Lovely bike, Chris and so glad things are sorted for you.

I see you're using a Thudbuster LT suspension seatpost. I'm a big fan and have LTs or STs on four of my bikes, appropriate to use. I have found fitting the optional neoprene sleeve cover from new has really kept the bushings clean over time and through weather and it was something Cane Creek/Thudbuster asked me if I'd fitted when I had an early bushing failure (persistent clicking) on one covered nicely by warranty (they sent new bushings and the tool to quickly and easily remove/install).

Best, Dan.

PH

  • Hero Member
  • *****
  • Posts: 2397
Re: New Style Eccentric Bottom Bracket Torque Setting
« Reply #5 on: June 21, 2023, 06:51:20 PM »
Looks great, appropriately dirty without being filthy!
Marathon Plus tyres and a Thudbuster....
What size wheels and tyres are they?

JohnR

  • Hero Member
  • *****
  • Posts: 710
Re: New Style Eccentric Bottom Bracket Torque Setting
« Reply #6 on: June 21, 2023, 07:39:11 PM »
I was sick of replacing transmission parts on derailleur fitted bikes - mostly due to the towpath near me turning all chain oil into grinding paste!
It may be worthwhile considering a Hebie Chainglider to further reduce this problem.

WorldTourer

  • Full Member
  • ***
  • Posts: 148
Re: New Style Eccentric Bottom Bracket Torque Setting
« Reply #7 on: June 22, 2023, 05:49:53 AM »
It may be worthwhile considering a Hebie Chainglider to further reduce this problem.

The Nomad Mk3 frame is belt-drive-ready, so no need for a cludge like the Hebie Chainglider.

Matt2matt2002

  • Hero Member
  • *****
  • Posts: 1946
Re: New Style Eccentric Bottom Bracket Torque Setting
« Reply #8 on: June 22, 2023, 06:03:06 AM »
What's a cludge?
Never drink and drive. You may hit a bump  and spill your drink

steve216c

  • Sr. Member
  • ****
  • Posts: 274
Re: New Style Eccentric Bottom Bracket Torque Setting
« Reply #9 on: June 22, 2023, 06:22:27 AM »
It may be worthwhile considering a Hebie Chainglider to further reduce this problem.

The Nomad Mk3 frame is belt-drive-ready, so no need for a cludge like the Hebie Chainglider.

It might be belt drive ready, but photo shows the bike in question  with a chain. Upgrading to a belt is not cheap and has not been done yet. The Chainglider is relatively inexpensive and reduces grime reaching chain, reducing wear and maintenance and like prolonging life of the running gear.  It also reduces ankle tattoos in oil, or getting oil on your clothes.

I was a Chainglider doubter till I bought one. My commute in all weathers used to take me shortcuts through the forest which were always messy. Every weekend I’d need to clean and re-oil the chain. I am currently on a chain approaching 8,000km that is fairly clean (but never been cleaned) which I have oiled about 3 times- once because factory lube had worn off, and the other times because I had the wheel off for other reasons and used the opportunity to lightly oil seeing as the Chainglider had been removed for the work I was doing.

My approx 16,000km experience with Chainglider have saved countless hours of chain maintenance for sure compared with the first 5,000 km without one.

+1 on John‘s suggestion. I also recommend a Chainglider
If only my bike shed were bigger on the inside...

steve216c

  • Sr. Member
  • ****
  • Posts: 274
Re: New Style Eccentric Bottom Bracket Torque Setting
« Reply #10 on: June 22, 2023, 06:29:49 AM »
What's a cludge?

Chain Lube Un‘ Dirty Grime Eluder?  ;D
If only my bike shed were bigger on the inside...

WorldTourer

  • Full Member
  • ***
  • Posts: 148
Re: New Style Eccentric Bottom Bracket Torque Setting
« Reply #11 on: June 22, 2023, 08:38:16 AM »
What's a cludge?

A word defined as “a haphazard or makeshift solution to a problem”.

Upgrading to a belt is not cheap and has not been done yet.

At least on the continent, you can upgrade to a belt for not much more than 200€ – historically the high price came down to the need for a special frame, but the OP for whom my advice was ultimately intended already has a Nomad Mk3. A Chainglider is 30€. I’d say that the 170€ difference is a great price to pay for never again having to oil a chain or adjust a Chainglider, and if you can afford a Rohloff-based bike, that is not a lot of money relatively speaking. Though it stocks them, SJS Cycles does not recommend Chaingliders, and my own experience with the product led me to the same opinion.

« Last Edit: June 22, 2023, 09:26:12 AM by WorldTourer »

Matt2matt2002

  • Hero Member
  • *****
  • Posts: 1946
Re: New Style Eccentric Bottom Bracket Torque Setting
« Reply #12 on: June 22, 2023, 11:00:43 AM »
and my own experience with the product led me to the same opinion

What happened to put you off?
I love mine and echo the above positive comments.
Anyone any idea why SJS don't recommend them?
Never drink and drive. You may hit a bump  and spill your drink

WorldTourer

  • Full Member
  • ***
  • Posts: 148
Re: New Style Eccentric Bottom Bracket Torque Setting
« Reply #13 on: June 22, 2023, 11:40:49 AM »
What happened to put you off?

The Chainglider is not sealed, and therefore it will not keep out sand and soil in places where the wind blows that along – some of the world’s most popular bicycle-travel routes are like that. Complete disassembly was then required in order to adequately clean the chain. Plus, even under ideal conditions the Chainglider required more frequent adjusting than I wanted to do.

I eventually just took the Chainglider off as too much bother, and tossed it into a bin on the roadside, and I can’t say that the remaining 6,000 km of that tour were worse because of that. Of course, now with the Nomad Mk3 and a belt drive, that is all a distant memory anyway.

As for why SJS Cycles doesn’t recommend them, I don’t know exactly. All I know is that when I was originally planning to buy one and told SJS that in an e-mail, the employee replied that he and his colleagues had found the Chainglider “a poor product” during their own riding, and they did not recommend that I buy one.
« Last Edit: June 22, 2023, 11:44:46 AM by WorldTourer »

martinf

  • Hero Member
  • *****
  • Posts: 1167
Re: New Style Eccentric Bottom Bracket Torque Setting
« Reply #14 on: June 22, 2023, 03:48:55 PM »
The Chainglider is not sealed, and therefore it will not keep out sand and soil in places where the wind blows that along – some of the world’s most popular bicycle-travel routes are like that. Complete disassembly was then required in order to adequately clean the chain. Plus, even under ideal conditions the Chainglider required more frequent adjusting than I wanted to do.

It doesn't keep out water either, but it still works quite well in the prevailing weather conditions in southern Brittany where I live and it does keep most of the wet muck off the chain.

Fine, dry dust isn't a problem where I ride, but I imagine this would be a good reason not to use a Chainglider in some places. The sand on the tracks in the dunes that I occasionally use is probably too coarse, because the Chainglider works quite well on that.   

I've had one on a utility bike for 12 years now, and have progressively fitted Chaingliders to all the family bikes that are compatible (it won't work on the Brompton folders or the large visitor bike with vertical dropouts and a chain tensioner).

The main advantage for me is increasing the intervals between chain maintenance by a factor of about 3, maybe even more. It probably also increases chain, sprocket and chainring life, but this is difficult to prove because the transmission had already been used on most of the bikes to which I have fitted Chaingliders.

Another advantage is keeping chain oil off clothing or skin.

I eventually just took the Chainglider off as too much bother, and tossed it into a bin on the roadside, and I can’t say that the remaining 6,000 km of that tour were worse because of that.

I was very sceptical when I first tried one, but reckoned it was worth a try at the price. And had it not worked for me, easy to remove and discard, even when on tour.

Though having used Chaingliders for more than a decade, if I ever ride in fine dust, nowadays I would probably remove it and keep it to refit later after leaving the dusty area and cleaning the chain.

Nomad Mk3 and a belt drive

None of the 8 family bikes with Chaingliders are compatible, so that would mean new frames or expensive frame modifications, plus all the specific parts for belt drives.

So belts aren't an economic option for me. It might be different for someone buying a new bike, or who already has a belt-compatible frame.
« Last Edit: June 22, 2023, 04:02:43 PM by martinf »