Author Topic: Ebay: Mercury 26in frame ;)  (Read 2335 times)


macspud

  • Hero Member
  • *****
  • Posts: 730
Re: Ebay: Mercury 26in frame ;)
« Reply #1 on: May 25, 2015, 04:12:09 pm »
I hadn't realised that there were 26" versions of the Mercury, I'd thought they were all 700c.
« Last Edit: May 25, 2015, 11:57:03 pm by macspud »

in4

  • Hero Member
  • *****
  • Posts: 1716
Re: Ebay: Mercury 26in frame ;)
« Reply #2 on: May 25, 2015, 06:15:55 pm »
The vendor supplied the following additional information:

Serial number looks like K9 6091427. Top tube is 56cm, seat tube is 52cm.
« Last Edit: May 25, 2015, 11:38:30 pm by in4 »

geocycle

  • Hero Member
  • *****
  • Posts: 1318
Re: Ebay: Mercury 26in frame ;)
« Reply #3 on: May 26, 2015, 09:15:53 am »
I hadn't realised that there were 26" versions of the Mercury, I'd thought they were all 700c.
Agree, think that must be a typo?
 

Kuba

  • Full Member
  • ***
  • Posts: 103
Re: Ebay: Mercury 26in frame ;)
« Reply #4 on: May 26, 2015, 09:37:14 am »
Doesn't seem a typo. 26' Mercuries were built in Bridgwater and the above seems to have been Kevin Sayles' work (K9 will probably turn out KS on closer inspection).

geocycle

  • Hero Member
  • *****
  • Posts: 1318
Re: Ebay: Mercury 26in frame ;)
« Reply #5 on: May 26, 2015, 10:20:45 am »
Thanks didn't know that.
 

Kuba

  • Full Member
  • ***
  • Posts: 103
Re: Ebay: Mercury 26in frame ;)
« Reply #6 on: May 26, 2015, 01:06:07 pm »
No problem. Now I dug up a photo of a 26' Mercury that was available some time ago on SJSC pre-owned section, I think this particular one was owned by Robin Thorn. Seems like a nippy bike.

Dave Whittle Thorn Workshop

  • Hero Member
  • *****
  • Posts: 582
    • Thorn Cycles
Re: Ebay: Mercury 26in frame ;)
« Reply #7 on: May 27, 2015, 08:49:58 am »
The 26" Mercury was basicly a Kevin handbuilt Sport Tour which existed long before the current Mercury model, depending on the customers riding style and intended use they were often a shorter wheelbase than a standard RST and often had custom fittings and 9/10 had an elaborate paint job.

We did the frame swap for this customer not so long ago, I can assure anyone of its provenance and good condition. 

Hope this helps, Dave.