Author Topic: My new Raven AT  (Read 19131 times)

LowFlyingHawk

  • Newbie
  • *
  • Posts: 48
 

Pedaldog

  • Full Member
  • ***
  • Posts: 150
Re: My new Raven AT
« Reply #1 on: September 18, 2004, 08:18:05 PM »
Looks pretty good Hawk!
Hope you have loads of good riding with it.
 

luceberg

  • Jr. Member
  • **
  • Posts: 77
Re: My new Raven AT
« Reply #2 on: September 19, 2004, 02:27:03 AM »
Hey!..are those stem stackers under the head tube!? Looks good though!
 

LowFlyingHawk

  • Newbie
  • *
  • Posts: 48
Re: My new Raven AT
« Reply #3 on: September 19, 2004, 08:57:32 AM »
I am planning on moving that...heh.  As I said, it is only semi-assembled - ie just out of the box and sat together just to have a look.  Don't read too much into it.
 

Dave Whittle Thorn Workshop

  • Hero Member
  • *****
  • Posts: 582
    • Thorn Cycles
Re: My new Raven AT
« Reply #4 on: September 20, 2004, 09:39:18 AM »
Hi, I would move the spacers NOW, that will put stupid amounts of preasure on the fork steerer and may bend it even on a short trip round the block, it would also explain why you thought the front end felt heavy!

Below is an example of a headset put together correctly :-




LowFlyingHawk

  • Newbie
  • *
  • Posts: 48
Re: My new Raven AT
« Reply #5 on: September 20, 2004, 11:48:11 AM »
Cheers.  I moved them well before attempting to ride it.  As I said, everything was sitting together without being assembled with any intent when I took the pictures.  It probably has more to do with the fact that the frame is slightly longer and the bars substantially lower (in relation to the seat) than on the hybrid I currently have.  That would indicate either (or both) of me and the bike need some adjusting.  

 

Stijn

  • Jr. Member
  • **
  • Posts: 54
Re: My new Raven AT
« Reply #6 on: October 14, 2004, 09:40:48 AM »
Driving with the spacers like that is definitly dangerous. I'm sure the fork is not designed to take the strain like that.

Cheers,

Stijn