Author Topic: Spoke Length Confirmation - Andra 30 Rims, Rohloff and Son 28  (Read 5017 times)

Slammin Sammy

  • Sr. Member
  • ****
  • Posts: 401
Hi guys,

I'm leaning towards getting the Andra rims straight away, rather than starting with Grizzlies. As much as I'd like to have a more responsive bike on the European holiday, I can't be bothered with the hassle and expense of changing over to heavier duty later. I've decided that Rule No. 5 applies here. (For those not familiar, see The Rules by Velominati - The Keepers of the Cog http://www.velominati.com/the-rules/. There is wisdom and honour in upholding The Rules.)

As I am about to order the hubs and rims, I need to confirm the spoke lengths one more time. By my best advice, lengths are as follows:

1) Front wheel - Andra 30 CSS - SON 28 hub - 32 spokes - 3 cross build - 260mm spokes
2) Rear wheel - Andra 30 CSS  - Rohloff Speedhub - 32 spokes - 2 cross build - 238mm spokes.

As I am getting a non-disc SON, the hub is symetrical like the Rohloff, so all spokes on each wheel are the same length.

Are we good to go?

Thanks,
Slammin!
« Last Edit: May 20, 2013, 05:28:53 AM by Slammin Sammy »

Danneaux

  • Administrator
  • Hero Member
  • *****
  • Posts: 8277
  • reisen statt rasen
Re: Spoke Length Confirmation - Andra 30 Rims, Rohloff and Son 28
« Reply #1 on: May 20, 2013, 05:42:42 AM »
Sam,

Perhaps this will help: http://www.thorncycles.co.uk/forums/index.php?topic=4523.msg39423#msg39423

By coincidence, I just today measured the six spares Thorn supplied with my Nomad and posted all the details at the link above.

Good to go!

Best,

Dan. (...who also urges you to remember the Rules of Velocio: http://cycling.ahands.org/bicycling/velocio.html )
« Last Edit: May 20, 2013, 05:51:53 AM by Danneaux »

NZPeterG

  • Hero Member
  • *****
  • Posts: 726
  • It's Great to Be Alive! Again! Go Cycle. . . . . .
    • Kiwi Pete's Cycling Safari
Re: Spoke Length Confirmation - Andra 30 Rims, Rohloff and Son 28
« Reply #2 on: May 20, 2013, 06:53:26 AM »
Well this is how to find out watch spokes to order.

http://www.kstoerz.com/freespoke/fullcalc

It's the best I have find over all the year's of Wheel building, I have just Build up a New Rear Wheel for my New Surly Big Dummy That I have just ordered and paid for  ;D



Pete  ???

The trouble with common sense is it is no longer common[

http://kiwipetesadventures.tumblr.com/

http://kiwipetescyclingsafari.blogspot.co.nz/

Looked after by Chris @ http://www.puresports.co.nz/
For all your Rohloff and Thorn Bicycle's in NZ

Slammin Sammy

  • Sr. Member
  • ****
  • Posts: 401
Re: Spoke Length Confirmation - Andra 30 Rims, Rohloff and Son 28
« Reply #3 on: May 20, 2013, 01:40:04 PM »
Well this is how to find out watch spokes to order.

http://www.kstoerz.com/freespoke/fullcalc

It's the best I have find over all the year's of Wheel building, I have just Build up a New Rear Wheel for my New Surly Big Dummy That I have just ordered and paid for  ;D

<snip>

Pete  ???


Phwoarr!!!!!!!! Pete!! I love those things! They just look so butch - you could deliver refrigerators with them!  ;D

I've seen that spoke calculator before (it might have been you that posted it previously), but it doesn't have the Rigida rims in its database, and so you have to go elsewhere to get the ERD. SON has a good one for their hubs, which helpfully gives you the ERD back when you choose a rim. It carries the Andra and the Zac, but not the Grizzly (that I could tell).

Thanks,
Sam

mickeg

  • Hero Member
  • *****
  • Posts: 2787
Re: Spoke Length Confirmation - Andra 30 Rims, Rohloff and Son 28
« Reply #4 on: May 21, 2013, 02:10:36 PM »
I cannot confirm, my recent build was 36h, not 32h.  But I used this to size rear spokes and it worked fine.  I got ERD for the Andra 30 rim  from SJS website.
http://www.rohloff.de/index.php?id=84&L=1
« Last Edit: May 21, 2013, 02:13:05 PM by mickeg »