« previous next »
Pages: [1]

Author Topic: canti vs V brakes  (Read 17913 times)

tynevalleycommuter

  • Newbie
  • *
  • Posts: 44
canti vs V brakes
« on: March 01, 2004, 02:01:10 PM »
Are canti and V-brake bosses the same dimensions and in the same position relative to the rim on a MTB (26" wheels) - i.e. are they interchangeable from a fitting point of view? I would like to try changing but want to make sure it's feasible before I go out and buy any bits&pieces...

What about levers, would they need to be changed to suit?
Logged
 

luceberg

  • Jr. Member
  • **
  • Posts: 77
Re: canti vs V brakes
« Reply #1 on: March 03, 2004, 01:42:13 AM »
Canti and V brake position and fittings are the same but brake levers need to pull more cable. Dia Compe do drop bar levers for V brakes.
Logged
 

tom w

  • Newbie
  • *
  • Posts: 6
Re: canti vs V brakes
« Reply #2 on: March 09, 2004, 02:09:59 AM »
You can avoid having to buy new levers to go with the V-brakes (circumventing the problem of different cable-pull) by getting a QBP Travel Agent, which is basically a roller-cam which sits at end of the V-brake, replacing the Shimano 'noodle'. These work fine, are well made with a sealed bearing and basically last forever. You can't use 2mm cable, but then with V-brakes, you won't need to...
Ask at your LBS.
Logged
 
Pages: [1]
« previous next »