« previous next »
Pages: [1]

Author Topic: Fitting Ergon GP5 grips  (Read 3367 times)

steveparry

  • Newbie
  • *
  • Posts: 10
Fitting Ergon GP5 grips
« on: July 15, 2017, 01:09:12 PM »
So I've got the old grips off and struggling to get these Ergons on. I haven't tried any liquid or lube yet but they are very tight to start and get tighter as more advanced on the bar. Don't want to use a mallet as I may change the bars so might have to take them off again soon. Any tips?
Logged

in4

  • Hero Member
  • *****
  • Posts: 1799
Re: Fitting Ergon GP5 grips
« Reply #1 on: July 15, 2017, 03:04:40 PM »
Yes, spray some furniture polish on the bars. Worked for me, although I did smell of lavender for a while!
Logged

Danneaux

  • Administrator
  • Hero Member
  • *****
  • Posts: 8281
  • reisen statt rasen
Re: Fitting Ergon GP5 grips
« Reply #2 on: July 15, 2017, 03:36:13 PM »
I generally use water with a little soap in it.  :)

Best,

Dan.
Logged

steveparry

  • Newbie
  • *
  • Posts: 10
Re: Fitting Ergon GP5 grips
« Reply #3 on: July 16, 2017, 02:16:01 PM »
Thanks guys. Found I'd already hit the end of the bar which was why it wouldn't go on any further. These are slightly shorter than the previous grips. Soapy water made it so much easier with the second grip.
Logged

energyman

  • Hero Member
  • *****
  • Posts: 609
Re: Fitting Ergon GP5 grips
« Reply #4 on: July 16, 2017, 07:07:05 PM »
Somewhere it recommends Surgical Spirit (Rubbing alcohol / isopropyl alcohol) as this evaporates and leaves no residue.
I have used it successfully.
Logged
Pages: [1]
« previous next »