First oil change: can't get the drain plug out!!!

[david jey]

HELP!

As the title says really. No matter how I try I can't get the drain plug screw to budge...and I don't want to try too hard because I'm already worried I might be rounding off the bolt.

Any tips to GENTLY coerce out the bolt? Obviously I can't resort to my usual method of freeing sticky bolts, which is soak the whole thing in plusgas or similar...!

[stutho]

The Drain plug should have been lock-tighted in place, if the wrong lock-tight was used then it would be a very difficult to remove the plug, however they may be a way! All Lock-tight brakes down at just over 100C therefore if you can borrow a soldering iron with a clean tip warm up the grub screw for 2 minutes and then try.

Good luck

[Eric]

When you refit the drain plug, degrease it and it's hole (use a q-tip) and put some Loktite nutlock on it - just in case it comes undone!

[stutho]

Any progress David?

[david jey]

It's out!

Had one more go at it yesterday, as a triumph of hope over experience. Mole grips on the end of a ball-end allen key for extra leverage and lo and behold it budged!

Oil change now done!