« previous next »
Pages: [1]

Author Topic: marathon tyre pressures  (Read 12967 times)

nomis

  • Newbie
  • *
  • Posts: 3
marathon tyre pressures
« on: February 11, 2005, 08:32:23 pm »
I have just got a pair of marathon kevlar 26x1.75 for my xtc. The pressure max is 70psi, but I have noticed on this forum that people have put 100psi in them, is this wise?
Logged
 

Chris Land

  • Jr. Member
  • **
  • Posts: 85
Re: marathon tyre pressures
« Reply #1 on: February 17, 2005, 10:47:19 am »
not sure about the 1.75s, but the 1.5s take 100 psi.  I am riding Panracer 1.75s (high-roads) at the moment and they recommend 70 but take 100 easily and feel a bit faster and more responsive at the higher pressure.  Not had a problem with it yet...
Logged
 

TonySmith

  • Newbie
  • *
  • Posts: 36
Re: marathon tyre pressures
« Reply #2 on: November 08, 2005, 01:04:46 pm »
I normally use about 80-85 in the rear and 75-80 in the front. I've tried 90 but this is too hard unladen. I've just had to replace my rear tyre due to a nastly bulge after 3800 miles but believe this was caused by scuffing the sidewall a few hundred miles back on a rocky bridleway.
Logged
 
Pages: [1]
« previous next »