Author Topic: Thorn 110mm 5arm Reversible SINGLE ring 42T  (Read 108 times)

swayzak

  • Jr. Member
  • **
  • Posts: 75
Thorn 110mm 5arm Reversible SINGLE ring 42T
« on: November 14, 2026, 09:05:20 PM »
Hello

This chain ring came with my Sterling (2010) but I can't seem to find an identical replacement from SJS

Is the 42T version still available?

Thanks

PH

  • Hero Member
  • *****
  • Posts: 2624

swayzak

  • Jr. Member
  • **
  • Posts: 75
Re: Thorn 110mm 5arm Reversible SINGLE ring 42T
« Reply #2 on: November 15, 2026, 08:04:31 AM »
Thanks

Ah, I thought 42T referred to number of teeth!

So I think this is the same model (will count number of teeth on current one)

I can't see the rear sproket (for Rohloff) listed on my original invoice - is there a likely replacement candidate for this as well?

I'm looking at changing the whole drive train as pretty worn now

Andyb1

  • Sr. Member
  • ****
  • Posts: 336
Re: Thorn 110mm 5arm Reversible SINGLE ring 42T
« Reply #3 on: November 15, 2026, 10:25:33 AM »
42T will be the number of teeth - on the SJS site you can say what size chainring you want.

There are two different rear sprocket types for Rohloff - the older style screw on type and the later design with a clip.  You need to know which type your bike uses.  And obviously tooth count.

Whereabouts are you?   If your bike has the screw on type you will need a special tool - perhaps easier done by a Rohloff dealer?

mickeg

  • Hero Member
  • *****
  • Posts: 3114
Re: Thorn 110mm 5arm Reversible SINGLE ring 42T
« Reply #4 on: November 15, 2026, 10:57:24 AM »
I think the generic default Rohloff sprockets fitted to bikes sold by Thorn was 17 teeth, but you can easily check to confirm what you have. 

But the default Rohloff sprockets that came with a Rohloff hub if purchased elsewhere was 16 teeth.  I built up my Nomad Mk II, bought my Rohloff hub elsewhere, I have 16 teeth on mine.

swayzak

  • Jr. Member
  • **
  • Posts: 75
Re: Thorn 110mm 5arm Reversible SINGLE ring 42T
« Reply #5 on: November 15, 2026, 01:41:55 PM »
42T will be the number of teeth - on the SJS site you can say what size chainring you want.

There are two different rear sprocket types for Rohloff - the older style screw on type and the later design with a clip.  You need to know which type your bike uses.  And obviously tooth count.

Whereabouts are you?   If your bike has the screw on type you will need a special tool - perhaps easier done by a Rohloff dealer?

Doh! Yep I see that now, thanks

Will check teeth on rear sprocket as well

RonS

  • Full Member
  • ***
  • Posts: 236
Re: Thorn 110mm 5arm Reversible SINGLE ring 42T
« Reply #6 on: Today at 12:33:49 AM »
Original chainring and sprocket from 2010? Well done, you!

If you haven't changed sprockets since you got the bike in 2010 it'll have the screw on sprocket, as the splined version was introduced in 2016. I don't think Rohloff offer the screw on type anymore, but SJS sell an aftermarket Jtec replacement that I've got and works fine. You can also retrofit the new splined version. If you do the work yourself and go with the new splined sprocket, they need different removal tools, so you would require one tool to remove the screw on sprocket now, and another tool to remove the splined carrier in the future. The splined carrier itself doesn't need to be removed to switch sprockets, only a circlip.

If you're not happy with your current gearing (not assuming you are, just pointing out the option), you can replace the chainring and cog with any tooth count you like. They don't have to match the original ones.