Author Topic: Fitting Tongsheng TCDZ2 250W with throttle to Rohloff  (Read 2629 times)

BigVern

  • Newbie
  • *
  • Posts: 3
Fitting Tongsheng TCDZ2 250W with throttle to Rohloff
« on: March 13, 2019, 07:43:18 AM »
Hi folks,
I have had an operation to remove tumour from centre of spinal cord at T6, went well but the power in my legs is now shot 😂. I had, before the operation, used a Mercury Rohloff (not the donor frame).
So what you ask ... well, I have a Rohloff wheel and Rohloff Ladies frame that could work with the TCDZ2. Has anybody done this? If so, how did you move the stock chainring out to 54mm from 50mm.
I presume with the torque sensing, brake safety cutout and throttle I will be able to shift gears safely.
Thank you,
Vern