Thorn Cycles Forum
Welcome,
Guest
. Please
login
or
register
.
1 Hour
1 Day
1 Week
1 Month
Forever
Login with username, password and session length
News:
SMF - Just Installed!
Home
Help
Search
Login
Register
Thorn Cycles Forum
»
Technical
»
Wheels, Tyres and Brakes
»
How to change brake pads
« previous
next »
Print
Pages: [
1
]
Author
Topic: How to change brake pads (Read 2686 times)
crazytraveler
Full Member
Posts: 111
How to change brake pads
«
on:
September 17, 2014, 01:16:13 PM »
I was thinking I just needed to slide them out and put the new ones, but I realized my Swissstop blue pads come with some fixing pins. What are they for?
And, sliding out doesn't go easy, should I do more strength or I am missing something?
Thanks!
Logged
Cycling around the world on a Thorn Nomad!
http://en.thecrazytravel.com/
il padrone
Hero Member
Posts: 1331
Re: How to change brake pads
«
Reply #1 on:
September 17, 2014, 02:09:49 PM »
Pull the pins out with pliers; slide brake pads out. Reverse process to fit new ones. The fixing pins are to stop your pads falling out if you apply brakes and roll backwards (eg. on a steep slope). This can happen and is most disconcerting when you (eventually) discover their absence
Logged
rualexander
Hero Member
Posts: 908
Re: How to change brake pads
«
Reply #2 on:
September 17, 2014, 02:33:13 PM »
When sliding the new pads into place, a few drops of dish washing liquid as a lubricant makes them slide on easier.
Logged
crazytraveler
Full Member
Posts: 111
Re: How to change brake pads
«
Reply #3 on:
September 17, 2014, 03:03:59 PM »
Thanks,
After playing for a while with the brake pads I realised about the pin and pull it out.
Puting new pads I found some of my new pins wouldn't find the hole in the other side, but the old ones did.
Logged
Cycling around the world on a Thorn Nomad!
http://en.thecrazytravel.com/
Print
Pages: [
1
]
« previous
next »
Thorn Cycles Forum
»
Technical
»
Wheels, Tyres and Brakes
»
How to change brake pads