« previous next »
Pages: [1]

Author Topic: Mavic MA40 rims cracked  (Read 2568 times)

DubblyDubblyDubbly

  • Newbie
  • *
  • Posts: 5
Mavic MA40 rims cracked
« on: July 08, 2011, 11:03:45 PM »
While changing my Thorn Audax rear tyre I noticed a crack in the rim. Not unusual I thought after reading about the hard anodised finish cracking, but on closer inspection I see it's cracked all the way through. Checked the front rim and it's the same... midway between 2 spokes. I assume I replace immediately. I ride approx 90 miles a week on occasional rough ground and don't exceed 35mph.
http://imageshack.us/photo/my-images/163/mavic2ma40.jpg/
http://imageshack.us/photo/my-images/28/mavic3ma40.jpg/
Any suggestions on replacements ?
Logged

JimK

  • Hero Member
  • *****
  • Posts: 1652
    • Interdependent Science
Re: Mavic MA40 rims cracked
« Reply #1 on: July 08, 2011, 11:41:18 PM »
I must say, that crack looks so neat - are you sure it isn't just a seam from manufacturing? Otherwise - mighty frightening!
Logged

DubblyDubblyDubbly

  • Newbie
  • *
  • Posts: 5
Re: Mavic MA40 rims cracked
« Reply #2 on: July 09, 2011, 12:03:58 AM »
It is odd that the crack is midway between 2 spokes and the Mavic label is over the crack. I don't know how these rims are manufactured, but I would assume if it was an extrusion that they would at least join the ends together. As you say, it's very neat, but the crack is definitely all the way through on both rims. Anyone else got MA40's they can take a close look at ?
Logged

rualexander

  • Hero Member
  • *****
  • Posts: 908
Re: Mavic MA40 rims cracked
« Reply #3 on: July 09, 2011, 01:02:37 PM »
Pretty sure that's just the rim joint, perfectly normal.
Logged

stutho

  • Administrator
  • Hero Member
  • *****
  • Posts: 848
Re: Mavic MA40 rims cracked
« Reply #4 on: July 09, 2011, 07:04:33 PM »
If this "crack" is on the opposite side to the valve hole then it is just the rim joint which is fine.
Logged
Pages: [1]
« previous next »