Thorn Cycles Forum

Community => Rohloff Internal Hub Gears => Topic started by: sydney_b on December 17, 2005, 09:48:33 pm

Title: Photos of non-chain side of Rohloff installation
Post by: sydney_b on December 17, 2005, 09:48:33 pm

I am frustrated at the moment because the vast majority of bike pictures where the hub can be clearly seen are of the chain side and  I really  would like to see pictures of the non-chain side of the various ways the Rohloff can be installed.  I believe this would do a great service to all the folks here considering a Rohloff for a custom-built bike as well as the mechanics who will get the job of installing them.

Thank you!  
/s

Title: Re: Photos of non-chain side of Rohloff installation
Post by: paulhipwood on December 18, 2005, 04:45:19 pm

Hi
Follow this link to an article on the Roloff hub.
It shows how to remove a wheel from a Raven, this is on page 3. It also has a good comparison table for the various crank and pinion options.

hope this helps

paul

http://www.sjscycles.com/thornwebsite/thornpdf/ThornLivingWithARohloff.pdf

Title: Re: Photos of non-chain side of Rohloff installation
Post by: sydney_b on December 18, 2005, 04:56:21 pm

Thanks Paul!

I thought I had downloaded every single one of the PDFs, but this is one I hadn't seen and it's quite helpful.   Thank you!

Title: Re: Photos of non-chain side of Rohloff installation
Post by: Team Triplet on January 02, 2006, 02:55:05 pm

quote:

---

Originally posted by paulhipwood

Hi
Follow this link to an article on the Roloff hub.
It shows how to remove a wheel from a Raven, this is on page 3. It also has a good comparison table for the various crank and pinion options.

hope this helps

paul

http://www.sjscycles.com/thornwebsite/thornpdf/ThornLivingWithARohloff.pdf

---

See also:
http://www.team-triplet.com/TTSite/exp1.htm#Rearendnonchain