Thorn Cycles Forum

Private Classified => Wanted => Topic started by: triaesthete on August 02, 2014, 03:41:31 PM

Title: Wanted: Rohloff toque arm assembly and internal shifter mechanism.
Post by: triaesthete on August 02, 2014, 03:41:31 PM

Hello
can any body help with any or all of the parts required to convert an OEM/disc/EX box hub to quick release torque arm and internal shifter type with v brake mounted cable stop ?

Happy to buy but could also consider a swap if any one is desperate to convert the other way. (With medium Sterling frame, BB7 caliper and Thorn disc and disc rim if reqd  :o) This hub is going in my Sherpa to gain carrying capacity.

Any proposal or query considered. Happy to help with assembly, wheelbuilding or technical details if required.

Happy days
Ian

Title: Re: Wanted: Rohloff toque arm assembly and internal shifter mechanism.
Post by: markbUK on August 02, 2014, 04:49:28 PM

Hi I can help you out with internal mech, I have just removed mine, to fit the ex box, I would think its done 2k miles since new, it includes all the connectors etc ... Happy to swap for the bb7 and disk, as I want to fit a disc at some point

Mark

Title: Re: Wanted: Rohloff toque arm assembly and internal shifter mechanism.
Post by: triaesthete on August 04, 2014, 07:45:33 AM

Hi Mark

sounds like a fair offer. I'll check out the disc and caliper and PM you in the next day or two.

Cheers
Ian

Title: Re: Wanted: Rohloff toque arm assembly and internal shifter mechanism.
Post by: Dave Whittle Thorn Workshop on October 21, 2014, 04:27:11 PM

Have the rest of the bits used if you need them, 50% of SJSC retail.