Thorn Cycles Forum

Technical => Transmission => Topic started by: majorbloodnok on July 20, 2014, 10:17:21 PM

Title: front derailleur
Post by: majorbloodnok on July 20, 2014, 10:17:21 PM

Hi folks
Couldn't find answer on search so had to post my schoolboy question. ...

I'm doing a component swap to an audax mk 3 frame (just bought a s/h frame)and wondered what band size I need on the front deraillear?  My 32 that came off the doner bike is too loose on the thorn. ...

I have a campag mirage front.

First post - nice forum.  I hope to be riding my new steed soon and will try not to ask such drivel in the meantime

mbn

Title: Re: front derailleur
Post by: rualexander on July 20, 2014, 11:05:38 PM

Mk3 takes a front derailleur clamp diameter of 28.6mm.

Title: Re: front derailleur
Post by: majorbloodnok on July 20, 2014, 11:27:03 PM

Ah, I see that campag don't make that size and I'd need a shim -apparently Shimano provide with their derailleurs - or I'll have to buy a braze on and an adapter

Bit of a pain

Title: Re: front derailleur
Post by: JimK on July 20, 2014, 11:36:08 PM

That Audax is a nice bike! Hope you can post some good stories once you get it on the road!

Title: Re: front derailleur
Post by: Andre Jute on July 20, 2014, 11:52:21 PM

Welcome, MBN. There are no stupid questions, just stupid ways of wrecking components, generally arising from not asking the question! This is a nice forum: no one will sneer at you for asking a question.

Title: Re: front derailleur
Post by: mickeg on July 21, 2014, 12:26:29 AM

Not sure if this would be the right size for you.  I needed a shim for front derailleur on a different bike.  In my case, the shim was needed because I used a derailleur that came off an Aluminum frame bike with larger diameter tubing.

I found that the shim I needed was exactly the same thickness as a shim that came with a stem for a 1 1/8 inch steerer tube, the shim was to convert that stem to a 1 inch steerer.  With a hack saw I made it the right size and put in the second slit so that it was in two pieces.

Title: Re: front derailleur
Post by: Dave Whittle Thorn Workshop on July 21, 2014, 09:10:22 AM

http://www.sjscycles.co.uk/wheels-manufacturing-1-1-8-inch-318-mm-to-1-inch-286-mm-front-derailleur-shim-prod18555/

Title: Re: front derailleur
Post by: majorbloodnok on July 23, 2014, 07:20:20 AM

Thanks guys.   I have a spacer somewhere that I bought for standard bars to fit an oversized stem.....I wonder. ...