Thorn Cycles Forum
Technical => Wheels, Tyres and Brakes => Topic started by: Matt2matt2002 on March 13, 2014, 11:39:37 AM
-
Digging through a spares box, preparing for my first oil change, and came across 6 new spokes supplied with my Raven.
unused and sellotaped together.
I notice one had a strange end to it.
I am not up on spokes at all so could someone please comment?
A couple of snaps to give you an idea of what I have.
(https://lh4.googleusercontent.com/-lPQzWllNL4c/UyGWS1t7JII/AAAAAAAABvE/RJoxKYe5iek/w958-h719-no/Raven+002.jpg)
Its the lower left spoke in the picture
(https://lh4.googleusercontent.com/-eshlc93JBpo/UyGWuOGk3nI/AAAAAAAABvM/won2ozlJMiY/w958-h719-no/Raven+003.jpg)
Lower left again. Appears to have something like a mushroom head to it
Matt
-
Ah ha the mystery spoke i can tell you straight off before the experts come in.
I have no idea. ::)jags.
-
That odd-looking spoke is the other end of that one spoke, Matt; what you see is the nipple screwed onto the threads. The others should look the same at the other end.
All the best,
Dan.
-
He's sending you up, Dan.
-
That odd-looking spoke is the other end of that one spoke, Matt; what you see is the nipple screwed onto the threads. The others should look the same at the other end.
All the best,
Dan.
Sorry Dan. I usually follow you but not this time.
One spoke is definitely different.
I think
Matt
-
Matt,
I know not everyone is equally inclined mechanically or equally familiar with bicycle components, so I always try to answer genuine requests sincerely. Maybe it is the teacher (former university professor and professional bicycle tour-group leader) in me that values education and access to it, so I'll have another go.
Matt, the spokes in your wheels have two parts:
a) The spoke itself, with a hooked bend and head at one end and rolled threads at the other, joined by a shaft.
b) A nipple. This usually has four sides or flats, and serves like a "nut" to thread onto the threads at the end of the spoke. Once the spoke and nipple are assembled in your wheel (between hub and rim), turning the nipple with a wrench takes up slack and tensions the spoke properly, making your wheel stiff and ridable. A spoke nipple looks like this: http://en.wikipedia.org/wiki/Spoke_nipple
In your bundle of six spokes, you should have a nipple screwed onto the end of each spoke. It looks to me like one spoke/nipple compo has been reversed compared to the others when they were taped together -- your photo shows a bunch of spoke heads and one nipple on the end of a spoke. That's the only difference I see. At the other end, you should see a bunch of nipples and one head.
Best,
Dan.