Thorn Cycles Forum

Technical => General Technical => Topic started by: jags on January 05, 2013, 06:10:55 PM

Title: how to reset my cycle computer.
Post by: jags on January 05, 2013, 06:10:55 PM

i want to reset my cycle computer but no idea how to  need help please.
its a Blackburn Atom4.0
i usually keep the manual i didn't this time round.
reset wheel size 559
from KM toMPH
.

Title: Re: how to reset my cycle computer.
Post by: ZeroBike on January 05, 2013, 06:34:56 PM

http://www.blackburndesign.com/customer-service/manuals

Title: Re: how to reset my cycle computer.
Post by: Danneaux on January 05, 2013, 06:42:19 PM

Hi jags!

Here is the product manual for your Blackburn Atom 4.0:
http://www.blackburndesign.com/blackburn/wp-content/themes/blackburn//manuals/cyclometers/atom_2.0_4.0.pdf

Be patient after clicking the link...Blackburn's server is slow as molasses.

If you need to call them, the number and hours are:
1-877-358-2239
Monday - Friday
9am - 7pm EST / 6am - 4pm PST

Email support available from here: http://www.blackburndesign.com/customer-service/blackburn/contact-us

Quote

reset wheel size 559

jags, here's what you do:

1) Remove the computer and flip it over. There's two buttons on the bottom, labeled SET and RESET. RESET puts everything back to factory defaults and adjusts core settings.

2) To set wheel size...Adjust the blinking digit (far left) by pressing RESET. Set and advance by pressing the MODE button (MODE button is the one on the right-rear when you face the computer).

3) Continue through all the fields. Press MODE to advance to set the odometer if you need to. Otherwise, press the RESET button again to back out and save or continue through the fields to the end.

Quote

from KM toMPH

Press RESET. Set & advance by pressing the MODE button (MODE button is the one on the right-rear when you face the computer).

Hope this helps,

All the best,

Dan.

Title: Re: how to reset my cycle computer.
Post by: jags on January 05, 2013, 06:49:09 PM

excellent lads thanks a million. ;)