Thorn Cycles Forum

Community => Thorn General => Topic started by: Etienne on November 20, 2012, 05:16:29 PM

Title: Disk type for Enduro and Tandem
Post by: Etienne on November 20, 2012, 05:16:29 PM

 :D   amazed ... but I need to go for Disk Brake now (after my beloved v-brake on RST)

For the REAR Wheel  - is a IS or a PM model needed ? I have no clue and cannot found it on the brochure.

- for Enduro model
- for the TWIN model

I would appreciate your help to understand this topic.

Title: Re: Disk type for Enduro and Tandem
Post by: triaesthete on November 20, 2012, 07:46:07 PM

Hi Etienne

Caliper mount on Thorn disc frames  is IS (international standard)  as seen here http://www.sjscycles.co.uk/avid-avid-bb5-mtb-front-rear-cable-disc-brake-black-g2cs-6-bolt-rotor-160-mm-prod29071/

Disc is special pattern for Rohloff hub (Not IS!) as seen here  http://www.sjscycles.co.uk/thorn-stainless-8-arm-rotor-for-rohloff-32-hole-hub-160-mm-prod24539/

I hope this helps
Ian