Thorn Cycles Forum
Community => Non-Thorn Related => Topic started by: Fred A-M on June 18, 2010, 01:11:47 PM
-
Hi
I need to replace my SKS mudguards on my RST - running 26" x 1.5" Schwable Marathons, I'm guessing I need 26" MTB? If so what width should I get?
Thanks
Fred
-
Hi
I need to replace my SKS mudguards on my RST - running 26" x 1.5" Schwable Marathons, I'm guessing I need 26" MTB? If so what width should I get?
Thanks
Fred
Fred
I use SKS P45 700c guards on my Sherpa fitted with the same tyres as your bike. They work very well.
John.
-
Thanks John for your response - am fairly green when it comes to tech specs and wasn't expecting a 700c recommendation so evidently I need to look into this a little further!
Any RST owners with an opinion?
Fred
-
Yep, 700c P45's on my RST too - just remember to trim a couple of inches off the rear guard so that the light / reflector points in the right direction.
-
Thanks chaps, 700c P45's it is then.
-
Thanks chaps, 700c P45's it is then.
Fred
I left the extra length on and it works fine.
If you don't like it you can cut it off later.
John.
-
What was the reason for purchasing the 700c size rather than a 26" version? Width?
-
Length ! - greater wrap around - more spray protection, particularly on the front
-
What was the reason for purchasing the 700c size rather than a 26" version? Width?
Hello
When I first purchased a Thorn frame I was told by Thorn to use 700c mudguards! As they work well I have continued to do so. Somewhere deep in the brochures you may find something as such.
John.