Thorn Cycles Forum
Community => Non-Thorn Related => Topic started by: vanne on August 05, 2026, 03:51:35 AM
-
I used to think grease fittings were one of those small parts that didn't really need much attention. If the grease gun connected, I assumed everything was working properly.
Turns out, that isn't always true.
A while ago, I was working on an older bike and noticed one fitting wasn't taking grease. At first, I thought there was something wrong with the grease gun, but after checking more carefully, I found the fitting itself was blocked.
I learned that forcing grease into a blocked fitting can sometimes cause more problems than it solves. The grease may find another path or damage the seal instead of reaching the parts that actually need lubrication.
Now I usually check a few things before replacing a fitting:
- Clean around the fitting first (dirt is usually the main problem)
- Make sure the grease coupler is locking properly
- Check that the fitting size and thread type match
- Replace damaged or stuck fittings instead of forcing them
For anyone maintaining older bikes, having a few replacement grease fittings and a small grease fitting tool kit around can be really useful. They are inexpensive parts but can save a lot of frustration during maintenance.
I also found that checking the fitting size and thread type before replacing it saves a lot of guessing. I usually keep a small reference guide handy when working on older equipment:
this grease fitting reference guide (https://homediyer.com/collections/grease-fitting)
How do you usually deal with fittings that won't accept grease? Do you try cleaning them first, or replace them immediately?