Thorn Cycles Forum
Community => Rohloff Internal Hub Gears => Topic started by: buffet on September 07, 2021, 11:24:25 AM
-
I am considering re-building my Rohloff on a Nextie Carbon rim with 43mm internal width to use with 3.0" tires. (it was originally laced to an i30 rim and used with 2.6")
As many carbon rim makers, Nextie has several options for spoke hole drillings, see attached picture. It's clear that drilling needs to be centered for the Rohloff (no offset), but which pattern is preferred, A or B?