Community > Rohloff Internal Hub Gears
Noisy rohloff
neil_p:
--- Quote from: Donerol on February 27, 2018, 12:29:32 pm ---It's easy enough to measure chainline with a cheap vernier caliper like this:
(You can also get ones with a digital read-out)
1. Measure the diameter of the seat tube just above the chainring.
2. Measure the gap between the seat tube and the centre of the chainring.
3. Add half of measurement 1 to measurement 2 to find your chainline.
Even I have done it successfully!
The recommended chainline can be found here: https://www.rohloff.de/en/products/speedhub/equipment/
--- End quote ---
Mine comes out as 56.5mm
mickeg:
My chainline is off by about 5mm. I intentionally set it that way to have a bottom bracket spindle about 100 mm shorter than I would have needed for ideal chainline.
I suffer no ill effects from that chainline error, but I use standard 8 speed cheapo chainrings and the cheapest KMC 8 speed chains I can find. I have not tried the higher end stuff like you cite.
Navigation
[0] Message Index
[*] Previous page
Go to full version