Author Topic: Thorn Frames - Bare Metal  (Read 7855 times)

Kuba

  • Full Member
  • ***
  • Posts: 103
Re: Thorn Frames - Bare Metal
« Reply #15 on: February 20, 2014, 09:52:07 am »
Just ordered one of the very last bare metal XTC frames Thorn have in stock. There are a couple of XTCs, one each of Audax Classic, EXP and Cyclosportif, and they all are further reduced by £100 from the original sale prices Dave posted above. The XTC was £199, terrific value given it's the best bike frame ever! ;)

All these frames are listed here: http://www.sjscycles.co.uk/page/find/?name=bare%20metal&page=1

Dave Whittle Thorn Workshop

  • Hero Member
  • *****
  • Posts: 582
    • Thorn Cycles
Re: Thorn Frames - Bare Metal
« Reply #16 on: February 26, 2014, 01:50:47 pm »
Some more found and added including a bargain Cyclosportif with missing forks

http://www.sjscycles.co.uk/thorn-clearance-frames-dept983_pg1/

Moorland Rider

  • Newbie
  • *
  • Posts: 16
Re: Thorn Frames - Bare Metal
« Reply #17 on: March 05, 2014, 10:48:56 pm »
I have been looking at this frame and am having fantasies of a new purpose sprayed frame!  Alas I cannot find a brochure with the sizing information for the XTC classic lugged frame.  Can anyone provide some dimensions for this frame?  I am 6'2" rider.Thanks in advance.

Kuba

  • Full Member
  • ***
  • Posts: 103
Re: Thorn Frames - Bare Metal
« Reply #18 on: March 06, 2014, 07:24:30 am »
Don't know about the XTC Classic brochure and have never seen one in flesh, but I'm 6'2'' and had a 595s XTC with drops - a perfect fit. The one I got now is 595m and will build up with straight bars. The 590m they're selling should be a good fir for you, but best is to just call Dave at SJSC and he'll explain it best.

martinf

  • Hero Member
  • *****
  • Posts: 1146
Re: Thorn Frames - Bare Metal
« Reply #19 on: March 16, 2014, 01:29:01 pm »
Just bought one of the clearance frames, not bare metal, this is a red Raven Tour.

It will (at least initially) be built up for utility use (pulling trailer, shopping, etc.) mainly using parts I already have, including a Nexus 8 hub (less grief than a Rohloff if it gets stolen).

Danneaux

  • Administrator
  • Hero Member
  • *****
  • Posts: 8232
  • reisen statt rasen
Re: Thorn Frames - Bare Metal
« Reply #20 on: March 16, 2014, 05:59:30 pm »
All congratulations on the new frames, Martin and Kuba; what a thrill!

Can't wait to see photos of them in the gallery.

Best,

Dan.

Bill C

  • Sr. Member
  • ****
  • Posts: 347
Re: Thorn Frames - Bare Metal
« Reply #21 on: March 25, 2014, 04:40:47 pm »
been years since i posted but I just bought one of the classic xtc's  ;D nearly bought one a few weeks ago at £299 so pretty chuffed i held off
a couple of posts up it was asked if anyone knew the sizing on the xtc lugged frames, this is what i used to establish it's pretty much identical to my 585 sherpa http://web.archive.org/web/20010309203941/http://sjscycles.com/26solobrochure/solobrochurewebp18.htm hit the index and most of the details are there to, seems 1.75 tyres should work though not recommended

ATB Bill

JWestland

  • Hero Member
  • *****
  • Posts: 756
Re: Thorn Frames - Bare Metal
« Reply #22 on: March 26, 2014, 10:11:12 am »
Does anybody know the virtual top tube on the 590M classic?

And the 590M/L other one?

The manfriend is tempted but I can only find 59-5 M/L in the brochure.

He's 6"1' with a 33" inseam.

(and I may go for the 455M it's a bit low but sure...spacers are acceptable on tourers ;)
Pedal to the metal! Wind, rain, hills, braking power permitting ;)