Thorn Cycles Forum

Community => Rohloff Internal Hub Gears => Topic started by: Zofo58 on May 06, 2015, 12:01:00 pm

Title: Recommendations for Disc Rims for Rohloff hub
Post by: Zofo58 on May 06, 2015, 12:01:00 pm

I am looking for recommendations for strong rims for rohloff disc hub.  I intend using it for rough gravel and greenways as well as light touring.
Should I go 32 or 36 hole?


Many thanks in advance.

Title: Re: Recommendations for Disc Rims for Rohloff hub
Post by: macspud on May 07, 2015, 04:23:44 am

32 or 36 hole rim? it really depends on the number of holes on your Rohloff hub, 32 hole hubs are the norm though they do make them in 36.

Title: Re: Recommendations for Disc Rims for Rohloff hub
Post by: Zofo58 on May 07, 2015, 11:21:11 am

I haven't bought yet I am trying to decide which hub to buy based on the suitable rims.  I want to lace in the best rim for my needs and that can run 35 to 42mm tyres.

Title: Re: Recommendations for Disc Rims for Rohloff hub
Post by: Dave Whittle Thorn Workshop on May 07, 2015, 11:37:41 am

Wheel size?

Title: Re: Recommendations for Disc Rims for Rohloff hub
Post by: Far-Oeuf on May 07, 2015, 11:42:47 am

you don't need a disc specific rim, there's a much wider choice if you opt for a standard rim.

Title: Re: Recommendations for Disc Rims for Rohloff hub
Post by: Zofo58 on May 07, 2015, 12:45:41 pm

Thanks for your replies  700C wheels in black

These are two of the types I am thinking of:

Easton ARC 29er
http://eastoncycling.com/en-us/dirt/wheels/all-mountain/arc-29/#

Halo Aerowarrior
http://www.halowheels.com/products/part/RMHA7W8W

Title: Re: Recommendations for Disc Rims for Rohloff hub
Post by: Zofo58 on May 08, 2015, 03:17:10 pm

Thanks for all your comments I went for these in the end.


http://www.starbike.com/p/DT-Swiss-TK-540-disc-black-32H-3869-en

Title: Re: Recommendations for Disc Rims for Rohloff hub
Post by: Far-Oeuf on May 08, 2015, 05:37:49 pm

just curious, is the 'disc' verison of that rim any different to the non-disc version?

Title: Re: Recommendations for Disc Rims for Rohloff hub
Post by: Danneaux on May 08, 2015, 06:02:21 pm

Quote

just curious, is the 'disc' verison of that rim any different to the non-disc version?

Machined sidewall for rim brakes, non-machined (dark anodized) for discs.

Best,

Dan.

Title: Re: Recommendations for Disc Rims for Rohloff hub
Post by: Far-Oeuf on May 08, 2015, 06:06:41 pm

ahh, so no difference in construction only cosmetic.

Title: Re: Recommendations for Disc Rims for Rohloff hub
Post by: Big_Jimbo on May 08, 2015, 07:05:51 pm

There will be internal difference that you can't see.
A rim brake rim has to be able to resist both the inward pressure of braking forces, the wear caused by braking and the outward pressure of the inflated tyre. A disc rim only has to resist the latter.
Because the disc specific rim doesn't have to have the vertical braking surface it is sometimes shallower in depth and are sometimes considerably lighter because of this. The confusing factor in lots of disc rims (especially 26" size) is the manufacturers have added strength for mountain bikers back in.

Title: Re: Recommendations for Disc Rims for Rohloff hub
Post by: Far-Oeuf on May 08, 2015, 07:20:34 pm

yeah, possibly.   it's possible the website just lists the wrong/duplicate info.  the tech-spec and photo of both rims is exactly the same.   I was looking for a disc specific rim a while ago, but gave up because the choice was so limited.

EDIT: the photo does show machined and non-machined surfaces, that's the only difference.

cheers