Technical > Wheels, Tyres and Brakes

Panaracer PaselaTG 700 x 32

(1/3) > >>

kermit:
Which way should they be fitted, yellow label on nearside or offside?  Looking at the arrow tread pattern makes me think that the yellow label shouldbe on the off-side so that water is squeezed into the grooves and deflected out.  But I'm sure I've seen many of these fitted the other way????

Is 95-100psi pressure OK?  No indication on the sidewalls.

Regards,
Ray

Dave Whittle Thorn Workshop:
yellow label drive side.

luceberg:
The recommended pressure is written on the sidewalls, but you have to look very closely. Anyway, it says 95psi. Personally, I run mine at 85psi at the back and 75psi at the front with no problems.

Ratty:
I have written to panaracer to ask and they said that it does not matter.

I thought this strange as there are clearly pyramid shapes along the tread but this is what they said.

Perhaps the tread can so the job whichever way it faces.

Anthony

brevetpilot:
quote:Originally posted by Ratty

I have written to panaracer to ask and they said that it does not matter.


Should be drive side. I've just bought two new Pasela TGs, and they have  'rotation' and an arrow moulded onto the sidewall. Pretty clear that one!

Navigation

[0] Message Index

[#] Next page