Thorn Cycles Forum
Technical => Lighting and Electronics => Topic started by: Thomas777 on February 21, 2017, 01:05:05 pm
-
Last week I built up the SP wheels for our touring bikes and hope to start the install soon. In previous posts I asked about the wire installed on the inside of the fender. But want to ask about another option.
If I install on the fork other than cable ties what might be a good fastener?
-
How about electrical tape. Easily removed and replaced.
-
yip tape will work but why not zip ties there fantastic and do a nice neat job. ???
-
Tape is better, less stress at the contact point.