Author Topic: Shimano crank question...  (Read 13156 times)

Istanbul_Tea

  • Full Member
  • ***
  • Posts: 167
Shimano crank question...
« on: June 13, 2004, 12:51:02 pm »
Is it possible to get Shimano cranksets with only steel chainrings instead of aluminum & steel or only aluminum?
 

luceberg

  • Jr. Member
  • **
  • Posts: 77
Re: Shimano crank question...
« Reply #1 on: June 17, 2004, 11:30:10 pm »
Only cheapo cheapo ones..but why?..If you want your chainrings to last forever then throw away your chain when it measures 12 1/16" for 24 links. Your cassette should be ok too. Or do you have another reason for wanting steel?
 

Istanbul_Tea

  • Full Member
  • ***
  • Posts: 167
Re: Shimano crank question...
« Reply #2 on: June 18, 2004, 09:31:30 am »
I have heard that steel rings are much longer lasting than aluminum
 

luceberg

  • Jr. Member
  • **
  • Posts: 77
Re: Shimano crank question...
« Reply #3 on: June 18, 2004, 03:15:48 pm »
Well, steel is definitely harder, and I guess that if you kept running the same chain, the rings would last longer.My MTB tourer has the same aluminium rings it came with back in '95 and I run 4 chains, rotating every 500 miles, but I haven't done huge milage, maybe 10,000.
Of course, on the long tour you are planning, it wouldn't be practical to do this, so the steel ring idea may have some sense.
I just checked the shimano website. The Deore chainset has all steel rings and that's fairly decent I think.
http://www.shimano-europe.com/cycling/catalogue/content_prodx.phtml?pid=11050&psid=25
I hope your EXP is turning out ok and best wishes for your grand tour.