Author Topic: Audax Mk4 due first week of May 2019...  (Read 1499 times)

lewis noble

  • Sr. Member
  • ****
  • Posts: 482
Re: Audax Mk4 due first week of May 2019...
« Reply #15 on: April 05, 2019, 10:18:38 AM »
Replying to Janet . . . . I've found the 28 Schwalbe One tyres fine, though not much riding so far on wet muddy lanes on them.  If they made the Supremes in 28 size, I would probably go for them, but I have no plans to change now.  And for my riding style, rim brakes have suited me fine,, again no plans to change.

Best wishes

Lewis
 

RST Scout

  • Sr. Member
  • ****
  • Posts: 290
  • Janet
Re: Audax Mk4 due first week of May 2019...
« Reply #16 on: April 05, 2019, 12:00:51 PM »
Thanks for that, Lewis.
Scout & Bettina's slave!

RST Scout

  • Sr. Member
  • ****
  • Posts: 290
  • Janet
Re: Audax Mk4 due first week of May 2019...
« Reply #17 on: April 05, 2019, 12:11:06 PM »
Dave, will the new Audax have bosses for front racks on the fork or are you using the mk4 fork?

Janet
Scout & Bettina's slave!

Dave Whittle Thorn Workshop

  • Hero Member
  • *****
  • Posts: 576
    • Thorn Cycles
Re: Audax Mk4 due first week of May 2019...
« Reply #18 on: April 05, 2019, 01:39:36 PM »
They are using the Mk4 fork or a Carbon fork. But theres no reason we couldn't use a Mk3 fork if we have one in the right rake and colour left.

martinf

  • Hero Member
  • *****
  • Posts: 617
Re: Audax Mk4 due first week of May 2019...
« Reply #19 on: April 07, 2019, 07:58:42 PM »
Replying to Janet . . . . I've found the 28 Schwalbe One tyres fine

I also have 28 mm Schwalbe One tyres on my one remaining derailleur bike, a Woodrup light tourer from 1977.

I generally prefer wider tyres, but the Schwalbe One are reasonably comfortable, probably even better for a light rider. These tyres have performed well so far, including one trip that ended with very wet weather, although this wasn't planned, as I generally only use the bike on good roads and in good weather. I dislike cleaning derailleurs now that I have the choice of riding hub gear bikes instead.   

Dave Whittle Thorn Workshop

  • Hero Member
  • *****
  • Posts: 576
    • Thorn Cycles
Re: Audax Mk4 due first week of May 2019...
« Reply #20 on: May 08, 2019, 10:49:29 AM »

Dave Whittle Thorn Workshop

  • Hero Member
  • *****
  • Posts: 576
    • Thorn Cycles
Re: Audax Mk4 due first week of May 2019...
« Reply #21 on: May 20, 2019, 03:48:18 PM »

geocycle

  • Hero Member
  • *****
  • Posts: 1203
Re: Audax Mk4 due first week of May 2019...
« Reply #22 on: May 20, 2019, 04:34:13 PM »
Nice pictures Dave, looks like a terrific bike and I hope it does well.  Is the bend in the front mudguard stay to avoid having to use the plastic safety clips?
 

PH

  • Hero Member
  • *****
  • Posts: 721
Re: Audax Mk4 due first week of May 2019...
« Reply #23 on: May 20, 2019, 05:41:22 PM »
Is the bend in the front mudguard stay to avoid having to use the plastic safety clips?
I'd guess that the stay is bent so it goes into the fitting cleanly, there's no need for a quick release with stays that attach away from the dropout, bend or no bend.  If something gets caught a guard rotating around a higher pivot point would move away from the tyre releasing whatever was caught.  I think some thorn models have always had the stays high on the fork, it's an even better idea when you're trying to avoid conflict with the disc brake.  I just wish they'd do something similar for the rear guards. Be interesting to see this bike from the other side.

But never mind the guards - what's going on with the gear cabling? It isn't through the adjusters than attached with zip ties?

Danneaux

  • Administrator
  • Hero Member
  • *****
  • Posts: 7629
  • reisen statt rasen
Re: Audax Mk4 due first week of May 2019...
« Reply #24 on: May 20, 2019, 07:10:50 PM »
Quote
what's going on with the gear cabling? It isn't through the adjusters than attached with zip ties?
Di2, methinks.

Best,

Dan.

PH

  • Hero Member
  • *****
  • Posts: 721
Re: Audax Mk4 due first week of May 2019...
« Reply #25 on: May 20, 2019, 08:38:00 PM »
Quote
what's going on with the gear cabling? It isn't through the adjusters than attached with zip ties?
Di2, methinks.

Best,

Dan.
Doh!
Hadn't even considered that, the whole electric shifting thing has (Thankfully) passed me by.