Author Topic: Thinking of Gates Carbon  (Read 1470 times)

sd

  • Sr. Member
  • ****
  • Posts: 293
Thinking of Gates Carbon
« on: January 08, 2018, 01:03:07 PM »
My aim is always to reduce maintenance. I have no interest in "fettling" . I have a inheritance coming and am thinking of buying....dare I say it....buying a new bike.....a bespoke bike even!! This would be the first bike I bought from new.
So Rohloff is a starter Gates Carbon Drive looks like the next move in reducing maintenance. Do they last as long as a chain? Anyone actually own one. Or no anyone who does? Thanks SD

horizon

  • Jr. Member
  • **
  • Posts: 72
Re: Thinking of Gates Carbon
« Reply #1 on: January 08, 2018, 02:04:28 PM »
This is quite an illuminating take on the topic:

https://forum.cyclinguk.org/viewtopic.php?f=16&t=115826

Danneaux

  • Administrator
  • Hero Member
  • *****
  • Posts: 7547
  • reisen statt rasen
Re: Thinking of Gates Carbon
« Reply #2 on: January 08, 2018, 02:08:31 PM »
SD,

Enter "belt drive" and "Gates" [no quotes] into the Forum search engine to pull up some lengthy discussion on the pros and cons.

Best,

Dan.

pavel

  • Sr. Member
  • ****
  • Posts: 344
    • Way-Word-Way Blog
Re: Thinking of Gates Carbon
« Reply #3 on: January 08, 2018, 04:41:28 PM »
I've never been lured by Koga bikes before but two things on that stand out for me - the sensible position of the bars, and of course the belt drive.  I may have to look a bit harder at newer options as the belt technology makes it's way to more and more touring products.  I'm no longer interested in any pro/con arguments about Gates carbon drives - I simply know that is the thing for me the same way I know that my heart is really only with Rohloff technology.  It's just how to get into a reasonable cost frame where I can simply move and adapt my current parts.

I appreciate every post on this matter, so thanks for the thread heads up horizon.  :)

I've never considered Koga as I've said, because I really value the Thorn brand, and steel is real.  I even like how they move slowly, though obviously that is what is causing my frustration at the same time. 

So one the one hand steel is real but on the other hand steel chains are real too. Real greasy or real rusty and a real pita always. 

energyman

  • Sr. Member
  • ****
  • Posts: 430
Re: Thinking of Gates Carbon
« Reply #4 on: January 08, 2018, 05:35:42 PM »
I have four bikes with Gates belts.  No more messy chains and oil on the shed floor, dead easy to clean a muddy bike with a watering can.  One Rohloff, 2 Alfines 11 and one Nexus 8.  So far no problems.
« Last Edit: January 08, 2018, 05:44:43 PM by energyman »

macspud

  • Hero Member
  • *****
  • Posts: 619
Re: Thinking of Gates Carbon
« Reply #5 on: January 08, 2018, 05:59:14 PM »
I've never been lured by Koga bikes before but two things on that stand out for me - the sensible position of the bars, and of course the belt drive.  I may have to look a bit harder at newer options as the belt technology makes it's way to more and more touring products.  I'm no longer interested in any pro/con arguments about Gates carbon drives - I simply know that is the thing for me the same way I know that my heart is really only with Rohloff technology.  It's just how to get into a reasonable cost frame where I can simply move and adapt my current parts.

I appreciate every post on this matter, so thanks for the thread heads up horizon.  :)

I've never considered Koga as I've said, because I really value the Thorn brand, and steel is real.  I even like how they move slowly, though obviously that is what is causing my frustration at the same time. 

So one the one hand steel is real but on the other hand steel chains are real too. Real greasy or real rusty and a real pita always.

pavel, it seems that there have been some problems with the Rohloff splined carrier and gates cog.

pavel

  • Sr. Member
  • ****
  • Posts: 344
    • Way-Word-Way Blog
Re: Thinking of Gates Carbon
« Reply #6 on: January 08, 2018, 07:27:08 PM »
I don't yet have the splined carrier on my Rohloff.  Then I noticed that there are two carriers, one "S" which only moves the chain-line 1mm and the other which is fatter and moves the chain-line out to 58mm.

I'm sure not going to run out and buy a Koga.  They are very well thought out it would seem, but I'm not going for Aluminum, and neither would I likely spend what they are asking.  But Kudos none the less for such an interesting expansion of choices.

What sort of problems have been discovered?

I remember about a year ago I was going to send out my RST for testing and would be fine with having the rear stay surgery done, but I ran into some road blocks and now I can't remember what they were.  Probably however I'd find it more cost effective to get a new frame instead.  It is a little sacrilegious to mess with such a fine and now unavailable frame as the RST is.

mickeg

  • Hero Member
  • *****
  • Posts: 1523
Re: Thinking of Gates Carbon
« Reply #7 on: January 08, 2018, 07:59:08 PM »
Do not own one, never have.  The two belt owners I talked to were both in Iceland when I was there in summer 2016.  One said that they carried a spare belt because you could not buy a belt anywhere in the country.  The other said that he thought that there was some efficiency loss, he had a bit of trouble keeping up with his friends and the way he said that I interpreted that to mean that he had kept up with them when he had a different bike.  One of them said that the chain line (or is it belt line?) has to be exactly right with a belt.

Apparently there have been two or maybe more generations of Gates belts.  Not sure what the differences were.

I prefer a chain because I use a different chainring for riding around home than I use for trips.  The ability to pull a few links out of the chain and swap to a different chainring size is important to me.

That is all I know, other than a belt needs a frame modification so you can install the belt, but I am sure you knew that too.

If you are going full custom, is a pinion under consideration too?  Or only Rohloff?

pavel

  • Sr. Member
  • ****
  • Posts: 344
    • Way-Word-Way Blog
Re: Thinking of Gates Carbon
« Reply #8 on: January 09, 2018, 01:42:20 AM »
I've heard the same about the chain-line, that it has to be exact and I just today read on a blog that it can happen that the splined cogs can make it so that the Rohloff fails.  The person writing the blog is very obviously not an experienced cyclist but he has a terrible time.  He does mention that Rohloff said that it can happen in about 1% of the cases, and in this case it was on the Koga bike.  My theory is that the belt the way Koga sets it up, puts too much tension on the Rohloff.  I know that the tension on the belts is higher than on a Chain drive.  The service he got by Koga when trouble happened was a good reminder of how we should all appreciate Thorns "real" commitment to it's customers.  And Rohloff's too.

So that is something to consider if one is going to be in the middle of Mongolia with winter approaching.  That's not me however.  :) But still, as much as I like the concept of having a belt, it will probably be a good while before I seriously consider splashing that much money into the concept.  It's sort of frustrating but mostly I am disappointed that I've got what I consider the best brand of bicycle on the planet.  Gee, what silly excuses now for not hitting the road?

Rohloff only, for me, from now on. 

Matt2matt2002

  • Hero Member
  • *****
  • Posts: 1355
Re: Thinking of Gates Carbon
« Reply #9 on: January 09, 2018, 09:55:55 PM »
Did someone mention oily chains?
Don't exist on my Raven.
Mr. Chainglider takes care of all that messy stuff.
Phew! And saved me buying a Gates set up, to boot!
Hee hee!
Never drink and drive. You may hit a bump  and spill your drink

John Saxby

  • Hero Member
  • *****
  • Posts: 1463
Re: Thinking of Gates Carbon
« Reply #10 on: January 10, 2018, 12:17:03 AM »
With you there, Matt.

A tale from a conversation here in Aug/Sept on belts, chains, and Rohloffs, which I found interesting:

A very experienced cyclist friend north of Toronto put me in touch with some of his cycling buddies who wanted to move to touring bikes with Rohloff hubs. They are planning a supported cross-Canada ride in 2018. I referred them to Thorn's range, both Ravens and Mercuries, and gave them my positive review of the Raven-mit-Rohloff. (I did say that for their light loads, the Mercury might work better for them.)

As it turned out, they decided to opt for substantially more expensive custom bikes made by a builder north of Toronto, not far from where they live. He recommended the Gates carbon belt. My friend (and I) questioned the recommendation, essentially asking, "Is a chain a problem, especially with a 'glider?" And, "What about the other questions about the belt itself--tension, precise adjustment, lower efficiency, etc.?" The builder said that all those issues have been addressed by the latest versions of the belt.

This is very much an arms'-length story, FWIW -- but I'll be interested to learn how their bikes and their tour play out.  I hope it works out well for them.  Personally, I wouldn't pay the extra $$ for a custom bike, let alone the extra $$ for a carbon belt.

pavel

  • Sr. Member
  • ****
  • Posts: 344
    • Way-Word-Way Blog
Re: Thinking of Gates Carbon
« Reply #11 on: January 10, 2018, 12:39:28 AM »
I'm starting to think that it's one of those things that has  to be experienced to be understood.  Sort of like steel versus Aluminum frames or 23mm vs 2.0 tyres on a bad road.  We met two dutch cyclists who were coming in the other direction and had done about 85 percent of the 5,000+ length of the Trans America trail - both on Rohloff bikes with a gates drive.  We talked and I rode the larger bike for a few minutes.  Wow.  Transformative.  But I guess words can't describe, it has to be experienced, sort of like a dutch bike versus and racer tuck over 8 hours, sort of thing.  Come to think of it, much like the dee rail your versus the Rohloff experience.

You all should try a Gates drive, before you use the numbers part of the brain. Seriously. You are not "getting it".

I've know I want one, since the experience of it.  It's the same with Rappahannock Oysters. Just try them - then talk - and then try going back.  ;)

The bicycle stone age is long overdue to be over. 
« Last Edit: January 10, 2018, 12:43:20 AM by pavel »

Andre Jute

  • Hero Member
  • *****
  • Posts: 3131
Re: Thinking of Gates Carbon
« Reply #12 on: January 10, 2018, 03:30:15 AM »
Apparently there have been two or maybe more generations of Gates belts.  Not sure what the differences were.

I haven't looked it up again, so I'm telling you from memory, George: When I looked into the Gates Drive about ten years ago or so, they were just switching over from a belt and pulleys that were smooth on the mating surface, to a system guided by a ridge and matching indentation in the centre of the mating faces, an additional reason to have a very straight driveline (chainline? beltline?). This leads to what those among us with roadie backgrounds (essentially everyone over 40, but not me) would consider a rather wide tread (Q-factor to the trendies). But, at least in theory, the guidance system on the Gates Drive may also allow Rohloff owners worried about falling into the 1% (mentioned by Pavel immediately above) to slacken the Gates belt a wee bit to protect their expensive gearbox. Of course, that might interfere with its claimed efficiency and probably also with its longevity (back then claimed to be 5000 miles per belt).

Personally, I wouldn't take a 1% chance of ruining my run-in Rohloff box (1) for the sake of a transmission that is likely to be less clean than my Chainglider.

(1) It is rather unlikely that I will have to buy another Rohloff box, but if I do, I will buy one that was only ridden to church on Sundays by a little old lady rather than a brandnew one, to get the benefit of it being run in.

mickeg

  • Hero Member
  • *****
  • Posts: 1523
Re: Thinking of Gates Carbon
« Reply #13 on: January 10, 2018, 10:19:24 PM »
...  Rohloff bikes with a gates drive.  We talked and I rode the larger bike for a few minutes.  Wow.  Transformative.  But I guess words can't describe, it has to be experienced, sort of like a dutch bike versus and racer tuck over 8 hours, sort of thing.  Come to think of it, much like the dee rail your versus the Rohloff experience.

You all should try a Gates drive, before you use the numbers part of the brain. Seriously. You are not "getting it".
...

I quite frankly can't imagine why a belt should feel different while riding it.  I would expect it to be quieter or maybe silent while a chain drive will have some noise (I know my chain needs lube when I notice the noise).  But otherwise I can't understand the difference in feel.

A friend of mine has a bike with a Shimano IGH (not sure if it is the 8 speed or 11 speed hub) and a belt drive.  He loves it, but he is an attorney, has no desire to learn anything about bike maintenance.  I think he can change a flat tube, but otherwise I do not think he can do anything.

I however do not mind a bit of maintenance.  I did an exercise ride yesterday, put on some chain lube before I started the ride and had a nice quiet chain drive for the ride.

pavel

  • Sr. Member
  • ****
  • Posts: 344
    • Way-Word-Way Blog
Re: Thinking of Gates Carbon
« Reply #14 on: January 11, 2018, 03:11:38 AM »
silky smooth and no harshness, with a bit of shock absorption as well.  All these chain qualities we are used to without being aware of it, but much like white noise in a room, that's suddenly turned off, one thinks "ahhh, thats nice".  :)

It really is very much like the subtle but profound difference between an aluminum frame and a good steel Audax frame. If one has only ridden an harsh riding frame, one doesn't know how sublime it could be on something that has been engineered better.