Author Topic: Cydekick dynamo  (Read 3476 times)

rualexander

  • Hero Member
  • *****
  • Posts: 908
Cydekick dynamo
« on: July 14, 2017, 10:53:00 pm »
Have we pondered this before?
http://www.spineticsinc.com/
Comes with built in 4800mAh battery, not a lot of information regarding fitting etc.

John Saxby

  • Hero Member
  • *****
  • Posts: 2000
Re: Cydekick dynamo
« Reply #1 on: July 14, 2017, 11:27:38 pm »
Thanks, Rual. Would be useful to have a photo of the device from the drive side at the rear of the bike--I can't see how it fits with the hub & spokes.  Doesn't look as if it would fit over/beside a Rohloff -- what about a front-hub fitment, I wonder? 

mickeg

  • Hero Member
  • *****
  • Posts: 2704
Re: Cydekick dynamo
« Reply #2 on: July 15, 2017, 12:26:23 am »
From teh photo at this link:
https://static1.squarespace.com/static/54f46dfce4b0f251eec01354/5511a09de4b05a30b1262224/56cd42b6d210b82eff11f560/1488077264012/spinetics-lifestyle-051_modified_01.jpg

It looks like it has a series of small round magnets that are fitted to the hub.  If I was going to try to do that I would use the disc attachment to the hub.  If they did that and used the bolt on fitting, if Rohloff is still four bolts and not six that might preclude fitting it to a Rohloff.  And then the armature thingy looks like it attaches to the outside of teh left dropout, that might make fitting fenders and a rack difficult if they attach in the wrong spot.



Danneaux

  • Administrator
  • Hero Member
  • *****
  • Posts: 8229
  • reisen statt rasen
Re: Cydekick dynamo
« Reply #3 on: July 15, 2017, 02:14:50 am »
Yep, Rual -- last discussed as a Kickstarter effort in 2015.

Like you, I'd like to see more specifics, but they seem to be lacking.

Best,

Dan.