Author Topic: Clickstand  (Read 14048 times)

bobs

  • Hero Member
  • *****
  • Posts: 601
Clickstand
« on: May 11, 2016, 08:03:06 pm »
I recently  had a clickstand for  sale . This was because I bought a new Nomad frame and the  clickstand  was too small. As it did not selling contacted  Tom  at clickstand to as if an additional section  could  be fitted to make it fit.
Tom was away on holiday but asked me to send the new measurements and he would deal with it when he returned.
I have just returned from a cycling tour of the Drau  river in Austria  to find Tom had sent all the parts to make my clickstand fit my new frame, FOC.
What fantastic  service from a one man outfit. I would recommend his products to anyone.

Bob

Danneaux

  • Administrator
  • Hero Member
  • *****
  • Posts: 8229
  • reisen statt rasen
Re: Clickstand
« Reply #1 on: May 11, 2016, 09:23:29 pm »
<nods, vigorously>

Tom Nostrant is one of the nicest people in all of cycling.

Period.

Best,

Dan.

Mike Ayling

  • Sr. Member
  • ****
  • Posts: 281
Re: Clickstand
« Reply #2 on: May 13, 2016, 04:19:23 am »
Great product.

I bought it for my Surly LHT but it works for both my Thorn Mercury and the Twin Raven Tandem.

The only thing to watch out for is to stop the front wheel rotating and stop the handle bars from turning.

Mike

John Saxby

  • Hero Member
  • *****
  • Posts: 2000
Re: Clickstand
« Reply #3 on: May 13, 2016, 05:03:03 pm »
Quote
stop the front wheel rotating

The only "but" I've had with my Clickstand, Mike, is that the little elastic tabs used to lock the brakes don't do so very well. The best device I've found for doing that in the Bike Brake band: http://www.bikebrake.com/.  Another device, with a lot of other uses besides, is the 4" Quick-release rubber tie: http://www.leevalley.com/en/garden/page.aspx?p=65393&cat=2,43319,33283

JimK

  • Hero Member
  • *****
  • Posts: 1652
    • Interdependent Science
Re: Clickstand
« Reply #4 on: May 15, 2016, 11:34:45 pm »
I just use a bit of nylon webbing with a fastex connector to tie the front wheel to the downtube. Makes the whole setup very stable. I keep that strap in one of the mesh pockets on the side of my handlebar bag.


energyman

  • Hero Member
  • *****
  • Posts: 603
Re: Clickstand
« Reply #5 on: May 16, 2016, 05:06:21 pm »
That looks nothing like the one I bought, must have cost a fortune to post it from the USA !! :)

David Simpson

  • Sr. Member
  • ****
  • Posts: 444
Re: Clickstand
« Reply #6 on: May 16, 2016, 06:32:12 pm »
That looks nothing like the one I bought, must have cost a fortune to post it from the USA !! :)

Yeah, you probably have the newer metal ones. Jim's is one of the older wooden ones. Very stable, but a quite heavy. Jim is in the US, so shipping wouldn't be as much as to the UK.

Perhaps Jim could post a video of him folding it up and stashing it on his bike. ;)

- DaveS

Danneaux

  • Administrator
  • Hero Member
  • *****
  • Posts: 8229
  • reisen statt rasen
Re: Clickstand
« Reply #7 on: May 16, 2016, 06:55:28 pm »
<nods> Dave's right...Jim got the "high winds/heavy loads" edition.

All the best,

Dan.

JimK

  • Hero Member
  • *****
  • Posts: 1652
    • Interdependent Science
Re: Clickstand
« Reply #8 on: May 17, 2016, 10:09:41 pm »
It is a bit more work, but here is the first fold:


in4

  • Hero Member
  • *****
  • Posts: 1709
Re: Clickstand
« Reply #9 on: May 18, 2016, 12:28:36 pm »
I think there is a Nomad big enough for that in the Mega brochure ;)

jul

  • Sr. Member
  • ****
  • Posts: 380
Re: Clickstand
« Reply #10 on: December 30, 2016, 03:43:52 pm »
I'm thinking to make a clickstand by myself and i have an idea as base to make one.

http://www.decathlon.fr/baton-arpenaz-100-bleu-id_8355380.html

I imagine that it's enought rigid, light and can be compact once folded

Add a 30mm frame clip and a rubber cap ..

http://ajile.biz/fr/caoutchouc-rond-noir/48-embout-enveloppant-rond-diam-12-mm-caoutchouc-noir.html
https://www.whitworths.com.au/main_itemdetail.asp?cat=133&item=91322&intAbsolutePage=&LinkedItem=91314&search123=

Some suggestions !?  :)

bobs

  • Hero Member
  • *****
  • Posts: 601
Re: Clickstand
« Reply #11 on: December 30, 2016, 04:52:40 pm »
Why not buy one from clickstand  your Nomad  deserves it. The cost might seem high but they are worth it.

Bob
« Last Edit: December 31, 2016, 09:17:19 am by bobs »

rualexander

  • Hero Member
  • *****
  • Posts: 908
Re: Clickstand
« Reply #12 on: December 30, 2016, 06:31:11 pm »
You can use a walking pole directly as a bike stand.
See this page at use no.4. https://couplahosers.wordpress.com/2014/11/17/4-uses-for-trekking-poles-when-bicycle-touring/
You can also use the pole at a shorter setting with the hand loop around your top tube or seat tube junction or rear rack. Just hook the loop over the pole end.
I tried this out the other week.

I have also made a clickstand type pole using old tent poles, a couple of walking pole feet, and some Sugru.
http://www.decathlon.co.uk/pack-of-2-rubber-tips-for-hiking-poles-hiking-poles-accessories-id_3758953.html
https://sugru.com/
I haven't really used it as a clickstand, I usually just lean my bike against something handy, but the pole I made is also a useful tarp pole.

Photo of my Sherpa propped up with walking pole looped onto rear rack.
« Last Edit: December 30, 2016, 06:40:24 pm by rualexander »

jags

  • Guest
Re: Clickstand
« Reply #13 on: December 30, 2016, 10:52:10 pm »
Rual that's a class photo 8)

Pavel

  • Guest
Re: Clickstand
« Reply #14 on: December 31, 2016, 03:04:51 am »
Rual, where ever the photo was taken ... I want to take a vacation there!