Thorn Cycles Forum

Community => Rohloff Internal Hub Gears => Topic started by: energyman on October 10, 2019, 05:38:43 pm

Title: Back to Front - Help
Post by: energyman on October 10, 2019, 05:38:43 pm
A cycling friend has a Rohloff with an X-Box (not on a Thorn obviously) with 1 the highest gear and 14 the lowest.
This is contrary is it not ?
How does one go about swapping it to what is the convention ?
Title: Re: Back to Front - Help
Post by: mickeg on October 11, 2019, 02:11:36 am
The shifter cables at the hub appear to be reversed.  When I changed my cables a few years ago, I accidentally got my cables reversed at the hub.  I had to disconnect my cables and switch them at the hub.

Title: Re: Back to Front - Help
Post by: PH on October 11, 2019, 08:34:53 am
Yep, done that and it's annoying enough to not do it again, but no big deal to reverse.
Title: Re: Back to Front - Help
Post by: Matt2matt2002 on October 11, 2019, 05:03:50 pm
Ha ha. Yes, I've done this when putting the bike back together after a flight from UK to Ethiopia.
The gear changer had shifted and I connected the connectors the wrong way around.
No big problem to correct.
But a strange experience cycling so fast in first gear.
Title: Re: Back to Front - Help
Post by: PH on October 12, 2019, 09:25:31 am
The gear changer had shifted and I connected the connectors the wrong way around.
No big problem to correct.
A bit more of a hassle if it's external shifting (Is that what's meant by X-box?) needs the cables re-threading into the pulley.
Title: Re: Back to Front - Help
Post by: energyman on October 19, 2019, 09:22:30 pm
Thanks for input.
Studying YOUTUBE for the vid on how to do it !
(Which come to think of it is what I should have done in the first place !)
Title: Re: Back to Front - Help
Post by: mickeg on October 19, 2019, 09:32:08 pm
Yup, youtube is great for some of this stuff.  With help from youtube a couple weeks ago I avoided a couple hundred dollar labor fee on my Land Rover D2.