Thorn Cycles Forum

Technical => Lighting and Electronics => Topic started by: Thomas777 on February 21, 2017, 01:05:05 pm

Title: About ready to start!
Post by: Thomas777 on February 21, 2017, 01:05:05 pm

Last week I built up the SP wheels for our touring bikes and hope to start the install soon. In previous posts I asked about the wire installed on the inside of the fender. But want to ask about another option.
If I install on the fork other than cable ties what might be a good fastener?

Title: Re: About ready to start!
Post by: bobs on February 21, 2017, 02:39:48 pm

How about electrical tape. Easily removed and replaced.

Title: Re: About ready to start!
Post by: jags on February 21, 2017, 05:19:12 pm

yip tape will work but why not zip ties there  fantastic and do a nice neat job. ???

Title: Re: About ready to start!
Post by: energyman on February 21, 2017, 10:08:56 pm

Tape is better, less stress at the contact point.